Defender: Starting the Mask

With the helmet nearing completion, I have begun on the mask. These two parts—the helmet and mask—could be worn alone, but they are designed to be worn together.



This is a variation of the gas mask, with two respirators on the sides of the snout replacing the single central one, which gives it an eerie alien look.



Each of the two eyepieces will be different. One of them will resemble a camera lens, and the other a porthole.



Here is a photo of the mask after the major leather pieces have all been stitched together.

Defender: The Neckguard Trim

I will be adding a second layer of leather over the bottom edge of the neckguard, in order to reinforce it and make it lay smoother. If I make the trim the same size as the neckguard, and stitch them together, the resulting piece will want to lay flat, which I don't want. The neckguard should roughly form a half circle. In order to get it to readily make that shape I will make the trim piece longer than the base piece.

If you take two pieces of paper—one slightly shorter than the other—and fasten the ends together, it will bend into a curve. If you wrap tape around a tube, and keep adding it on over itself, the tape will build up in thickness, with the circumference of each turn being slightly larger than the previous one. Drafting a pattern for the neckguard uses the same principle.


I can make the patterns in paper, and bend and measure them to find the right size differential, but that won't be accurate for cutting it in leather because the leather is thicker than paper, and thus needs a larger differential. Add to that the fact that vegetable tanned leather—which I cut and stitch while damp—will shrink while drying, and I can only guess at how long the trim should be.



Here is the neckguard trim piece after cutting and dying.



And here it is tacked into position. The oblong openings will hold luminiferous aether collection devices.

Underground Explorer: Designing the Goggles

These giant sized paper glasses are my beginning attempt to work out the pattern for the goggles. This is going to take a lot of trial and error to get it right.

Underground Explorer: Lamp Comb is Finished

After focusing on the whale tooth for awhile I have returned my attentions to the Underground Explorer's helmet. Yesterday I reworked the comb pattern and remade it to fit properly, then I cut out the leather and hand-stitched it over the acrylic comb form. Today I painted it black, and antiqued it brown to give it that old look. After drying, I bolted and riveted the comb to the leather helm, and attached the lamp to the front.



I have decided on all of the design elements of the helmet, and have just two more to complete: The eyecover/goggles, and the oxygen canister which will hook up to the snout. With this equipment our intrepid explorer will be protected from extremes in pressure and temperature, as well as falling rocks. They will also have a bright light to see what lies before them, and have a fresh supply of oxygen to weather the pockets of foul air. Hopefully this will protect them from all unforseen dangers that might lurk ahead.

Space Helmet: The Eyehole Trim

I'm pretty much making up the design of this piece as I go along. When I found the helmet at the yard sale, I knew I wanted to copy the basic shape in leather, but beyond that I had no plans. Once I had stitched the leather pieces together and removed them from the helmet, I knew that I would have to reinforce all raw edges to keep it from being too floppy.

So today—besides antiquing the helmet and snout, and adding the required snaps—I made a trim piece to go around the eye opening. I gussied it up a bit to make it interesting, adding some cut outs, dyed it black and riveted it onto the helm. Sure enough, it reduces the flop factor.

When I add on the collar it should significantly help the helmet hold its shape.

Designing a Steampunk Spaceman's Helmet

Today, Sunday, my wife and I went to some yard sales. Now sometimes you find nothing, and other times you find one gem. Just as we were about to leave one sale emptyhanded, I spotted a plastic astronaut's helmet. When I inquired about the price, the seller said $1--uh, 50¢--fearing I wouldn't cough up a whole dollar for this plastic helmet that was missing the visor. Of course, I saw much more in it. I knew I could pull a pattern off of it and remake it as a steampunk leather helmet!

Here is the plastic helmet as I bought it.

After thinking about how to break it up into separate leather pieces, I taped it all over with duct tape to make the patterns, and marked the divisions.

Here I've cut off the duct tape using an Xacto knife, and laid it down on heavy paper.

Next I've smoothed out the lines, removed the duct tape, and cut out the heavy paper patterns.

Next using the patterns I cut out the leather pieces, and punched the stitching holes, along with snap and buckle holes. I am leaving the front piece that covers the mouth removable so that the wearer can take it off for eating, etc.

Here I've stitched together the left center piece and the left side piece to see if it will work. I used a seam that exposes the edges, but after seeing it I think I'll remove the thread and do it over with an overlapping seam so that it will lie flat.

I will post more later as I progress on this project.

Designing a New Leather Mask

Spring is almost upon us, and leather mask sales should pick up as buyers think about what they're going to wear at music festivals. Above is my first sketch of an idea for a new mask, consisting of a whole bunch of cut out hearts. I drew this right before turning out the lights for bed. The star means I think it's a good design.

This is the next sketch the following day, seeing how it would work to have the eye openings be larger hearts, with other hearts around it. In designing a mask, the eye openings are critical.

Here I have fleshed out the idea, and after penciling in all the hearts on one half of the face, I have inked them in. Next I scanned this image and brought it into Corel Draw, where I fine-tuned it and mirrored it for the other half of the face.

And here is the finished mask, after cutting out the pattern in leather, shaping it to my face form, and painting it red. Lastly, I've listed it the Cut Out Hearts mask on Etsy, where I hope it will quickly sell!